We're Expanding The Workshop For The Corvair Build

  Դիտումներ 350,745

Matt's Off Road Recovery

2 ամիս առաջ

So we're expanding the workshop to make room for the Corvair.
**Be One Of The First To Get A Yellow Matt's Recovery Rope**
www.mattsrecoveryrope.com
Subscribe am-posts.info/cd/wdVOry0oNF9WIe_3uCfz9Q.html
Off Road Recovery Videos
Could I Make This Recovery Any Harder?!
am-posts.info/list/lNCbnGSnk4fLk2U/video
Jeep Stuck On 1,000 FT Cliff...Fault Line Trail
am-posts.info/list/qszZnGauvH61gXo/video
We Dragged This Car 10 Miles Through The Desert!
am-posts.info/list/ppaW26TPrp_Zmqg/video
Where Were They Going? Jeep & Ford Flooded In River
am-posts.info/list/05rWx6q_mmenqn4/video
Subaru Can't Handle The Sand
am-posts.info/list/qZmVt2m-wYSpgGk/video
We're Headed To Fab Rats...Corvair Build!
am-posts.info/list/t7La3GTHm4yTa3o/video
Why You Should Never Off-Road at Night
am-posts.info/list/xNzbq5_c1YW0gJg/video
Deadline Is Too Close...Can We Finish The Corvair On Time?
am-posts.info/list/m6y72p-zxJjCsYo/video
Nissan Is Ready to Flip Sideways & Another Ford Raptor
am-posts.info/list/ttqasXbJy6uni3o/video
Winder Towing and Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Ed’s Browning Hat amzn.to/35bbvus
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsrecoveryrope.com/
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B071RXKC7M/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B071RXKC7M&linkCode=as2&tag=windertowing-20&linkId=8168ff9f968defa533bd00654952d1a8
Shop tools!
Milwaukee 2767-22 Fuel High Torque 1/2" Impact Wrench w/ Friction Ring Kit
amzn.to/2qAiRbY
Tires on yellow banana!
Milestar Patagonia M/T Mud-Terrain Radial Tire - 35X12.50R15 113Q
amzn.to/2O8Yafx
Follow us on Facebook!
Winder-Towing-Inc-102949886782699/
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Jeep walk around video
am-posts.info/list/upSx0oCYl5mXmnY/video
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!

Մեկնաբանություններ
lars erik eng holm
lars erik eng holm 9 օր առաջ
that car wil be so cool
Michel te Braake
Michel te Braake 11 օր առաջ
This is much faster than "Project Binky"!
abobymous
abobymous 21 օր առաջ
This corvair build is awesome!
Fonda Peters
Fonda Peters 27 օր առաջ
You need a diesel.
Hershel Walker
Hershel Walker Ամիս առաջ
I don't subscribe to alot of channels. Just Subscribed!! I enjoy the videos and Matts positive approach to problem solving, either that or the editing team is severely talented. Anyway, Epic Build on the Corvair!! Where do I get my Jeep stuck to be recovered by that Machine? Keep up the good work and entertainment!!
Jay Gilson
Jay Gilson Ամիս առաջ
Call it the Javalina, because it’s a medium sized pig like hoofed mammal.
Randy Tolle
Randy Tolle Ամիս առաջ
Flux core or shielding gas on the welds?
Sam Buchanan
Sam Buchanan Ամիս առաջ
My brother an I made a coaster my brother rode it first you could stir it with a rope
Sam Buchanan
Sam Buchanan Ամիս առաջ
He rode it first he tried to turn it at the bottom of the hill it straight for the cteek
Bruce MacGlynn
Bruce MacGlynn Ամիս առաջ
Keep your weight on the rear tires. Ok sure, I got a Corvair right here. ha ha
oto kent 34
oto kent 34 Ամիս առաջ
Ne kadar çok kaynak oldu ve aracın kilosu çok her şey metal ayrıca bu Arabanın motoru çok kuvvetli olması gerekiyor 🪙🇹🇷🇹🇷🇹🇷🇹🇷
Ryder 12354
Ryder 12354 Ամիս առաջ
Is the ride finish yet did I miss the episode of it being finished..
Eric Butler
Eric Butler Ամիս առաջ
So, is it the MORRC ? or the MORRV?
Philip Anderson
Philip Anderson Ամիս առաջ
Drift trike story beats Richard Rawlings Gas Monkey Garage any day - AWESOME, and you survived!
FallingShells
FallingShells Ամիս առաջ
I can smell this video. Wait, maybe that's that's the grinding dust in my nose...
Acura RL
Acura RL Ամիս առաջ
When’s the next wagon video
ChevyLife97541
ChevyLife97541 Ամիս առաջ
hey wasnt there a new years finish deadline?? DYING to see this move under its own power.
rupe53
rupe53 Ամիս առաջ
I figure Mat's got a few bucks ties up in this project, that that's probably chump change compared to buying beer and pizza for the crew every day!
TheChaztor
TheChaztor Ամիս առաջ
I wonder what master fabricators are hidden away at a tow shops near me? 😝 Amazing stuff guys. (just pls up the voice volume)
Dave Smith
Dave Smith Ամիս առաջ
Is this going to replace, the yellow banana....
Build Theory
Build Theory Ամիս առաջ
Which seats are those? They look great!
Richard. R
Richard. R Ամիս առաջ
Can't wait new video build ur 4x4
Jessica Petty
Jessica Petty Ամիս առաջ
how close is it
gary moore
gary moore Ամիս առաջ
Rudy has some skills.
Jamie Newman
Jamie Newman Ամիս առաջ
Hey guys, could you run a compressor on the audio when you edit it. Sometimes while watching I'm surprised by a loud grinder in my headphones.
Ian from Ohio
Ian from Ohio Ամիս առաջ
Waiting on an update...
Aaron Ruggles
Aaron Ruggles 2 ամիս առաջ
It's like you got 2 channels.. Matt's Recovery and Matt's Garage
lineedsadragstrip
lineedsadragstrip 2 ամիս առաջ
VERY IMPORTANT !!!!! YOU REALLY BEAT ON THE YELLOW JEEP !! my question is what brand motor oil do you use ?????
lineedsadragstrip
lineedsadragstrip 2 ամիս առաջ
hey mat !!!! watch the movie point break with pat swazeee .... see the jonny utah get a pic of him & post on shop wall !!!!
Paul Hall
Paul Hall 2 ամիս առաջ
Al that steel it's going to weigh 5 tons by the time it's finished...
Wyatt Earp
Wyatt Earp 2 ամիս առաջ
Very Awesome AM-posts Channel !!
Alberto Lebron
Alberto Lebron 2 ամիս առաջ
Awesome built,, great team Don't forget Safety glasses when Grinding
Alberto Lebron
Alberto Lebron 2 ամիս առաջ
I thought the radiator suppose to float. Too many ridge mounts ?
Richard Spengler
Richard Spengler 2 ամիս առաջ
Hey Matt, whats with the sun glasses it's dark outside! 😂😂😎
Matt P
Matt P 2 ամիս առաջ
Can’t wait to see that thing out in the dunes
Everett Landry
Everett Landry 2 ամիս առաջ
Matt, I am really impressed with the yellow banana and the traction that you get from the tires that you are running. Can you provide the make and series of the tires that you run? I’ve watched many videos and can never see the info of the tires. Thanks, EVEREADY
Jay Solo
Jay Solo 2 ամիս առաջ
Good vibes all around you. Keep on keepin on brotha man 🤘
NuManXplore
NuManXplore 2 ամիս առաջ
Enjoying the build! Can’t wait to see the end result.
KevlarTwinky
KevlarTwinky 2 ամիս առաջ
One of my favorite fabricator-shows. Like following this build. Looking forward to see it in action
Leroy Martinez
Leroy Martinez 2 ամիս առաջ
I have just been totally into this build from the start. I'm actually not wanting this build to end, just for the sake of my entertainment. Keep up the good work everyone! Cool stuff going on!!
PandemicNewsWorldwide
PandemicNewsWorldwide 2 ամիս առաջ
Can we please see that gear shifter? Is there anyway we can use that in this build? Sounds really nostalgic.
Mester black92
Mester black92 2 ամիս առաջ
what abt painting ;;; I prefer the yellow Tiger
ٰ ٰ
ٰ ٰ 2 ամիս առաջ
60FPS please
Craig Hall
Craig Hall 2 ամիս առաջ
Nursing flash burned eyeballs? Wearing them raybans in the shop.
Dave li
Dave li 2 ամիս առաջ
The detailed cross adversely pump because father-in-law joly punish times a heartbreaking mimosa. same, imminent trousers
braxton carroll
braxton carroll 2 ամիս առաջ
It's great to see family building together. Not many who get along that well and with past "father/son" build channels showing how great it is to argue constantly... It's nice to see everyone working together and genuinely happy to get it done.... Also... Where's Lizzy?! Keep it up!
Chris Lovett
Chris Lovett 2 ամիս առաջ
Thanks for building something so cool and out of the ordinary
Ted Walker
Ted Walker 2 ամիս առաջ
👍
Ben M
Ben M 2 ամիս առաջ
I can't wait to see this vehicle out on recoveries!
Under The Microscope
Under The Microscope 2 ամիս առաջ
Just FYI A Late model 4 door Corvair bolts right up to a 1980s Toyota truck frame. The suspension bolt location was the mounting spot. It was a shock to me and my friend building it. it was like it was meant to be. It was an attention getter going down the road or trail. Love the build Matt.
Christian Lamar
Christian Lamar 2 ամիս առաջ
As much as the recovery are cool, I find myself looking forward to these more and more everyday. Can not wait to see the finished product.
D West
D West 2 ամիս առաջ
Rudy, through the garage door.... reminded me of Paul Jr.'s American Chopper intro.
H Gj
H Gj 2 ամիս առաջ
I am NOT telling you what you should do. I’m just sharing my experience related to something on this video. Like you, I was tormented by air compressor noise in my shop. I very much wanted to get it outside. I made that move a couple of years ago. It is really nice to have the noise out. As our weather started turning colder I noticed something I’m going to have to address. You may come to a similar conclusion. When I use my air tools now the outside air is pumped inside. That air is cold. It really creates a problem as I sometimes have to wait for the tool to warm up to keep using it. I would assume that there will be a condensation issue too, but I’ve not noticed that so far. In short, I think I need to build a bit more enclosure for my compressor and add a little heat. Not much, just a small heater, maybe even a light bulb. Just something to knock the chill off the incoming air. It occurred to me that this might be something you would want to consider. 🙂 Hope your Christmas was the best ever!
Stephen Gomez
Stephen Gomez 2 ամիս առաջ
I was like holy trans tunnel when I saw it, and then I realize you ran the heater core through there for heating so that's a great idea. But it made me sad when you cut the bumper to mount that winch instead of just doing a front receiver hitch and having your winch hook up like you do on your other Jeep and going with a permanent mount winch. I don't think I would have cut that chrome bumper it looked really nice the way it was I would have mounted that winch lower or differently all together.
Nick Johnson
Nick Johnson 2 ամիս առաջ
Came for the tows. Stayed for the build!
Gunzsmoke57
Gunzsmoke57 2 ամիս առաջ
I always look forward to these build videos!
None Ya
None Ya 2 ամիս առաջ
What's the capacity of that lift?
Kenneth Halverson
Kenneth Halverson 2 ամիս առաջ
Do you have any on going problems with sand clogging your radiator
mark speckan
mark speckan 2 ամիս առաջ
Coming together nicely. Great team work
paulpaul1948
paulpaul1948 2 ամիս առաջ
Love the reminiscing. The older we get the better we were. 😊
Rob Cacioppo
Rob Cacioppo 2 ամիս առաջ
Flash burn!
Chevy Foster
Chevy Foster 2 ամիս առաջ
I was just curious about is lizzy your daughter?
Brad Shantz
Brad Shantz 2 ամիս առաջ
Uumm soo did matt get pick pocketed on camera. Great work Rudy!
dale starnes
dale starnes 2 ամիս առաջ
cant wait to see it finished .
jack anderson
jack anderson 2 ամիս առաջ
Public Safety Announcement.... WEAR YOUR SAFETY GLASSES ...They do no good on your foreheads ...Seeing dogs are expensive...love your show
Chad Hicks
Chad Hicks 2 ամիս առաջ
Love the channel. Can't wait to see the finished product, an see this beast at work. Thank you Matt for doing what you do. Definitely my favorite channel.
Kyle Delfing
Kyle Delfing 2 ամիս առաջ
Have you heard about this revolutionary new product called aluminum?
Evan
Evan 2 ամիս առաջ
Was that gigantic monster in front of the radiator, the transmission cooler? Makes my Hayden 679 look like a dinner plate.
Geoff Melle
Geoff Melle 2 ամիս առաջ
I really enjoy the fabrication videos but the sound from the equipment is so loud and the voices are so quiet. I crank the sound up to hear voices and then get my ears blasted by the power tools.
samiam2714
samiam2714 2 ամիս առաջ
I love your channel. The recoveries, trail fixes, wheeling, and now fab work. Thanks for the content. If your ever in tahoe in the summer for vacation. Message me Id be happy to get you into our beaches here for some chillin’. Also you’ve got check out the rubicon trail out here.
Joseph Bailey
Joseph Bailey 2 ամիս առաջ
Rudy should do a video of how to weld and the different projects he has made. I really liked the hide away safe. So cool watching Rudy grow with the channel. You guys are doing great work.
Paddy VZ
Paddy VZ 2 ամիս առաջ
You've got 3 days left till 2021 Matt 😂
Larry Fry
Larry Fry 2 ամիս առաջ
Have you calculated how many pounds of wire you've put into that build so far? First rule of welding: do all your welding possible in 1G position (flat!). Why didn't the front clevis mounts get welded to the frame rail caps BEFORE the caps were welded onto the rails? You'll get better welds (i.e. stronger) in the flat position than in the semi-overhead.....because it's EASIER ON THE GUY DOING THE WELDING! :) I love the build, guys. Don't let us critics slow you down.
Batnasan Sukh
Batnasan Sukh 2 ամիս առաջ
Cant wait for the finished work. Great work guys
Buttersdynamite1
Buttersdynamite1 2 ամիս առաջ
7:13 This is Murica! Inchpoundoz...
Buttersdynamite1
Buttersdynamite1 2 ամիս առաջ
Still love your country because of freedom to buid all kind of stuff. Regulations in Europe are so stiff :/
TEXAS ILLEST
TEXAS ILLEST 2 ամիս առաջ
Matt check out Madoc rc he has your hero just a 1/10 scale lol you should check it out
TEXAS ILLEST
TEXAS ILLEST 2 ամիս առաջ
Jeep
rondogwil
rondogwil 2 ամիս առաջ
Couple old guys trying to remember stuff from when they were kids. LOL!! (from an older guy) Don't worry guys, it only gets worse. LOL.
Leon Zepol
Leon Zepol 2 ամիս առաջ
I can not wait till that thing is doing some recoveries!
Gary Stanley
Gary Stanley 2 ամիս առաջ
Of all the possible vehicles to start with...Awesome Choice!
McCager Bryant
McCager Bryant 2 ամիս առաջ
Very nice. Please tell me you will mount a Light bar coated basket on top! 😂🤣
Bill
Bill 2 ամիս առաջ
Matt, how about T shirts that say " Matt's Off Road Recovery We'll get em out"?
Josh Fitzpatrick
Josh Fitzpatrick 2 ամիս առաջ
I love the project aspect of your videos that you’ve been putting out, I’d love to see you build that odd vehicle you showed in the las video. Love the content!
Bells mountain adventures
Bells mountain adventures 2 ամիս առաջ
You need to check out madoc rc channel and watch the rc winder jeep in action Matt would be proud lol
Ray Sucato
Ray Sucato 2 ամիս առաջ
I think I would have PTFD (Post Traumatic Fun Disorder) when the build was complete if I was involved.
Coloradojeeper Jenny
Coloradojeeper Jenny 2 ամիս առաջ
Johnny paycheck still hasn't told you take this job and shove it. Cool
Jerry
Jerry 2 ամիս առաջ
After tearing out the wall the decision was finalized. We can now implant the Corvairistien into a a Mack sleeper cab. Kinda like a turkduckin...😂.
Jerry
Jerry 2 ամիս առաջ
Still think it woulda been cooler if they started with a Yugo😃
Lawrence Rhodes
Lawrence Rhodes 2 ամիս առաջ
While you are at it you could get the living room couch in the back seat.
WEOWNTHESKIES
WEOWNTHESKIES 2 ամիս առաջ
less grinder more lizzie
Taylorgang 208
Taylorgang 208 2 ամիս առաջ
y'all about to be def after this build haha
Ian Irving
Ian Irving 2 ամիս առաջ
I think you need to out a seat on the roof for Randy
Darrell Folk
Darrell Folk 2 ամիս առաջ
I Absolutely Love this AM-posts Channel!!! Lots of Love from Pennsylvania
mike Miller
mike Miller 2 ամիս առաջ
Build looks like its going to be awesome. Question, Has Matt gone all Hollywood on us with those wayfarers? LOL
4 wheels
4 wheels 2 ամիս առաջ
This is backyard custom building at it's finest. Awsome job guys it's going to be a beast and a blast to drive... A+++++
4 wheels
4 wheels 2 ամիս առաջ
Hey guys just had a quick question for Matt do you have the original straight 6 4.0 in the banana if so have you done any type of mods to the engine. Also what are you running for tires on that those things seem to hook up on all surfaces very well when aired correctly
Dave Ellis
Dave Ellis 2 ամիս առաջ
Horizontally filmed:)
Brad Maas
Brad Maas 2 ամիս առաջ
(2358) We dragged this car 10 meters through mud and snow! - AM-posts
David Wellen
David Wellen 2 ամիս առաջ
Laughed my ass off as I remembered things from my own past. Great story and great video.
redwalsh87
redwalsh87 2 ամիս առաջ
Blues brothers shades on Matt are a good look.
Phillip Sprague
Phillip Sprague 2 ամիս առաջ
Makes me nervous as a long tail day in a roomful of rockin chairs seeing these guys weld, grind and plasma cut with thaw aluminum radiator in the rig😲. One errand chunk of slag and you’re ordering a new one.
S
S 2 ամիս առաջ
How heavy is this thing?
Getting The Corvair Ready For Paint!
22:57
Matt's Off Road Recovery
Դիտումներ 437հզր
Testing the limits of my off-road trailer.
10:36
Matt's Off Road Recovery
Դիտումներ 363հզր
Rubi / Gor - Im ser
2:30
RAH MEDIA
Դիտումներ 143հզր
FIRE! How Are We Going To Recover This?
11:49
Matt's Off Road Recovery
Դիտումներ 587հզր
**Mud, Sand, and Snow~with~Jetta, Ram, and Impala**
17:50
Matt's Off Road Recovery
Դիտումներ 550հզր
Snow Too Deep For A Jeep, But Not For The Snow Cat
13:12
Matt's Off Road Recovery
Դիտումներ 521հզր
Nearly impossible recovery on the dry wash trail.
24:06
Matt's Off Road Recovery
Դիտումներ 1.6մլն
The Corvair Is Coming Home...Good Bye Las Vegas!
17:08
Matt's Off Road Recovery
Դիտումներ 420հզր
Let's Get The Corvair Engine Started & A Few Other Projects
13:15
Matt's Off Road Recovery
Դիտումներ 402հզր
Understanding the Tesla Model S Performance Motor
46:32
WeberAuto
Դիտումներ 134հզր
My Up Hill Battle...Rolled Jeep w/ NO POWER!
12:02
Matt's Off Road Recovery
Դիտումներ 540հզր
We're Headed To Fab Rats...Corvair Build!
17:19
Matt's Off Road Recovery
Դիտումներ 430հզր
Rubi / Gor - Im ser
2:30
RAH MEDIA
Դիտումներ 143հզր
Сколько стоит владеть Nissan GTR?
21:45
Психопаты Синдиката
Դիտումներ 832հզր
BMW M5 против Mercedes-AMG E63 S - ГОНКА
5:51
carwow Русская версия
Դիտումներ 164հզր
СДЕЛАЛИ БЫСТРУЮ МАШИНКУ ИЗ ХЛАМА!
20:42